bingo plus update today Philippines

Engine water inlet symptoms: how to identify and bingo plus update today Philippinessolve? All car owners know that the engine is the core part of the car. If water enters the engine, it will cause the car to be unable to run normally and even cause serious damage. So, how to determine whether water enters the engine? This article will introduce the symptoms of water entering the engine and the corresponding solutions. I. Symptoms of water entering the engine 1. The engine cannot start or the start is unstable. After water enters the engine, the electrical equipment of the vehicle (ignition system, starter, etc.) will be affected. When the car has not been able to start, this situation is likely to be caused by water in the engine.If the car can start, but the start is not stable enough, and the engine makes an abnormal noise, it may also be one of the symptoms of water entering the engine. Two. The engine loses power. When the engine enters the water, the water will enter the cylinder, resulting in a mixture of water and gas in the cylinder, resulting in engine abnormal operation and lack of power. At this time, the power output of the car will become abnormally weak or even lose power. 3. Water stains appear in the carburetor. The oil carburetor is an important part of the regulation of the engine mixture. If water enters the engine, water level or water marks will appear in the carburer. After entering the water, it appears in the state of banana milkshake most of the time, and the sound of "squeak, squeak" can be heard when the vehicle starts. Four. The exhaust pipe drain engine loses power, causing the car exhaust pipe to discharge a large amount of water vapor, and the exhaust pipe will also turn white, accompanied by a serious odor, which is all caused by water entering the engine.II. How to solve the problem of engine water inlet 1. Unplug the positive electricity and then raise the height of the engine from the ground to reach the drain engine and minimize water vapor entering the engine. Two. Check the air filter and oil filter. If the engine enters the water, not only the cylinder is flooded, but also the filter will be flooded. In particular, the air filter is the key to breathing the haze and cleaning up most of the dust and ash. When it is humid, the water will obstruct the passage of the air filter, causing the engine to lose power. Therefore, it is recommended to check and replace the filter to ensure that the air and oil in the engine can be reasonably filtered. 3. If water enters the engine when replacing the spark plug, it also contains water vapor, which will affect the normal operation of the spark plug and also cause the car to start abnormally. Therefore, it is recommended to replace the spark plugs of the car to ensure the normal operation of the engine.Four. Replace the electrical equipment of the car. Electrical equipment is an important part of the engine work. If the electrical equipment is invaded by water, it is easy to cause electrical short circuit or damage. Therefore, the car owner can go to the regular maintenance center to replace the electrical equipment. Water in the engine is one of the common problems in automobiles. Once it occurs, it needs to be solved in time. This article introduces some symptoms and solutions for judging engine water to help car owners identify and solve problems. However, it should be emphasized that if you can't answer the self-conscious search method in any step, it should be the best choice to find a regular maintenance store and ask professionals.

Contact Us
Phone：020-83484694